Homepage
Give Private Classes
Ambala 
    JAGDEEP  - Prof engineering - Ambala
₹380/hr
1st class free!
Tutor profile verified
Response Time 1hr
Classes offered by JAGDEEP
  • Individual
The classes will be held
  • at his home
Taught subjects
  • Engineering
  • Mechanical engineering
  • Civil engineering
  • Electrical engineering
  • Agricultural Sciences
  • Electricity
Levels
  • All Levels

To obtain a challenging position in an organization whereby I can apply acquired knowledge and skill and continuously grow, thereby contributing to the objective of organization.

Methodology

M. Tech. in Mechanical Engg. D.I.E.T., Kharar,
Mohali, Punjab Punjab Technical
University, Jalandhar 72% 2015
B. Tech. in Mechanical Engg. S.D.D.I.E.T.,Barwala, Panchkula, Haryana Kurukshetra University,
Kurukshetra 69% 2008
Diploma in Civil Engg. Govt. Polytechnic
Ambala City, Haryana State Board of Technical
Education, Haryana
60% 2004
Matric S.D.Sen.Sec.School, Ambala Cantt
Board of School Education, Haryana 59% 2001

Background

M. Tech. in Mechanical Engg. D.I.E.T., Kharar,
Mohali, Punjab Punjab Technical
University, Jalandhar 72% 2015
B. Tech. in Mechanical Engg. S.D.D.I.E.T.,Barwala, Panchkula, Haryana Kurukshetra University,
Kurukshetra 69% 2008
Diploma in Civil Engg. Govt. Polytechnic
Ambala City, Haryana State Board of Technical
Education, Haryana
60% 2004
Matric S.D.Sen.Sec.School, Ambala Cantt
Board of School Education, Haryana 59% 2001

Rates

Rate for 10 hours of classes : ₹3,600
Classes offered by JAGDEEP
Individual
The classes will be held
at his home
Taught subjects
  • Engineering
  • Mechanical engineering
  • Civil engineering
  • Electrical engineering
  • Agricultural Sciences
  • Electricity
Levels
  • All Levels

JAGDEEP 's CV

CURRICULUM VITAE



JAGDEEP KUMAR
House No. : 66-A, Ram Nagar E-mail (concealed information)
Ambala Cantt. Haryana (133001) Contact No.: +91-(concealed information)

CAREER OBJECTIVE
To obtain a challenging position in an organization whereby I can apply acquired knowledge and skill and continuously grow, thereby contributing to the objective of organization.

ACADEMIC CREDENTIALS
Qualification Name of the
Institute / School
Board / University Percentage Academic Year
M. Tech. in Mechanical Engg. D.I.E.T., Kharar,
Mohali, Punjab Punjab Technical
University, Jalandhar 72% 2015
B. Tech. in Mechanical Engg. S.D.D.I.E.T.,Barwala, Panchkula, Haryana Kurukshetra University,
Kurukshetra 69% 2008
Diploma in Civil Engg. Govt. Polytechnic
Ambala City, Haryana State Board of Technical
Education, Haryana
60% 2004
Matric S.D.Sen.Sec.School, Ambala Cantt
Board of School Education, Haryana 59% 2001

PROFESSIONAL EXPERIENCE
Total Experience = 10.5 Years (8.5 years Teaching Experience + 2 years Industrial Experience)
 Worked as Assistant Professor in Mechanical Engineering Department in Chandigarh Group of Colleges, Landran, Mohali from July 2016 to December 2018.
 Worked as Assistant Professor in Mechanical Engineering Department in Geeta Institute of Management & Technology, Kurukshetra from August 2011 to July 2016.
 Worked as Senior Sales Engineer in Jaya Hind Sciaky Ltd., Pune from February 2011 to June 2011.
 Worked as Stockiest Field Engineer in Larsen & Toubro Limited from March 2010 to February 2011.
 Worked as Commissioning/Service Engineer in K.C. Engineers Pvt. Ltd. from August 2008 to February 2009.
CONFERENCES & WORKSHOPS ATTENDED

 Attended a two week ISTE WORKSHOP on ‘INTRODUCTION TO RESEARCH METHODOLOGIES’ conducted by Indian Institute of Technology, Bombay from 25th June to 04th July 2012.
 Attended a two day ISTE WORKSHOP on ‘AKASH FOR EDUCATION’ conducted by Indian Institute of Technology, Bombay on 10th & 11th November 2012.
 Attended two week ISTE WORKSHOP on ‘ENGINEERING TERMODYNAMICS’ conducted by Indian Institute of Technology, Bombay from 11th to 21st December 2012.
 Attended three day International Conference on ‘EMERGING TRENDS IN ENGINEERING & TECHNOLOGY (IETET-2013)’ held at G.I.M.T., Kurukshetra from 25th to 27th October 2013.
 Attended a two week ISTE WORKSHOP on ‘ENGINEERING MECHANICS’ conducted by Indian Institute of Technology, Bombay from 26th November to 06th December 2013.
 Attended a two week ISTE WORKSHOP on ‘FLUID MECHANICS’ conducted by Indian Institute of Technology, Kharagpur from 20th to 30th May 2014.
 Attended a two week ISTE WORKSHOP on ‘CONTROL SYSTEMS’ conducted by Indian Institute of Technology, Kharagpur from 2nd to 12th December 2014.
 Attended a QIP short term course on ‘ADVANCED TECHNIQUES IN MICROSTRUCTURAL CHARACTERISATION’ at Indian Institute of Technology, Roorkee from 29th May 2017 to 02nd June 2017.

 Attended a short term course on “BUSINESS INCUBATION IN TECHNICAL INSTITUTIONS THROUGH ICT” conducted by Entrepreneurship Development and Industrial Coordination Deptt. NITTR CHANDIGARH at CGC-COE , Landran, Mohali from
21st to 25th May 2018.

 Attended a QIP short term course on ‘LABORATORY AND ERGONOMIC SAFETY FOR ENGINEERS’ at Indian Institute of Technology, Bombay from 11th to 15th June 2018.
 Attended an all India Workshop on ‘OPTIMIZATION TECHNIQUES IN MECHANICAL ENGINEERING’ conducted by Mechanical Engineering Division The Institution of Engineers (India) at CGC-COE , Landran, Mohali from 12th to 13th November 2018.



RESEARCH PUBLICATIONS
“Sliding Wear Resistance of Hardfacing Alloys and their Material Removal Mechanism” – A Research paper in International Journal of Engineering Research & Technology, Volume-4, Issue- 04 (April-2015) ISSN: 2278-0181.
“Effect of Microstructure on Sliding Wear Behaviour of Fe-Cr-C Hardfacing Alloys ” – A Research paper in 2nd International Conference on Research Innovations in Engineering & Technology, held at Maharaja Agrasen University, Baddi, Himachal Pardesh.
“Time Management” – A research paper published in 5th International Conference on Emerging Trends in Engineering & Technology at Geeta Institute of Management & Technology, Kurukshetra
“Friction & Wear properties of Hardfacing Alloys” – A research paper published in 5th International Conference on Emerging Trends in Engineering & Technology at Geeta Institute of Management & Technology, Kurukshetra
“Performance of Fe-Cr-C Hardfacing Alloys under Sliding Wear Conditions & Its Dependence on Microstructure” -– A Research paper in International Journal of Mechatronics and Manufacturing Technology, Volume-3, Issue- 1 (May-2018)
CERTIFICATE OF APPRECIATION
 Awarded with certificate of appreciation for successfully organizing the In-house industrial training at Geeta Institute of Management & Technology, Kurukshetra.
 Awarded with certificate of appreciation for successfully organizing ‘AUTO MECHANICA ’12, Car Engine Overhaul Workshop’ under the aegis of SAEINDIA at G.I.M.T., Kurukshetra from 14th to 17th April 2012.
 Awarded with certificate of appreciation for bringing more than 90% results in various Mechanical engineering subjects at Chandigarh Group of colleges, Landran, Mohali.
TECHNICAL BODY MEMBERSHIP
Associate member of ‘The Institution of Engineers (India)’ in Mechanical Engineering Division.
INTER PERSONAL SKILLS
 Ability to work as a single as well as a team.
 Able to work under pressure of deadlines.
 Inquisitiveness to learn new things on my own.
 Ability to improve continuously.
 Excellent written communication skills.
 Integrity and discipline.




PERSONAL SUMMARY
Father’s Name : Sh. Kanwar Paul
Date of Birth : 25 Nov. 1986
Sex : Male
Nationality : Indian
Marital Status : Married
Interest : Listening music, Watching News, Reading Newspaper
Languages known : English, Hindi, Punjabi.

I here by declare that the above information is true and correct in my knowledge.

Date

Place (Jagdeep Kumar)

Similar teachers

engineering classes closeby? Here's a selection of tutor listings that you can check out.
Superprof can also suggest mechanical engineering classes to help you.
Learning isn't a problem, civil engineering classes for all!
Taking electrical engineering classes has never been easier: you're going to learn new skills.

Ambala Cantt
Need guidance in Mathematics, Physics, Chemistry and Civil engineering here's your destination. Best in structure analysis, RCC, and Strength of Materials.
₹500
Shubham
1st class free!

I beleive in studying things for application point of view, focus on basics and target based study which gives better...

Classes by webcam Face-to-face classes Approved profile
Ambala Cantt
Iam Masters in geotechnical engineering , can teach any of the civil engineering subject including Maths , at present working as a lecturer in Govt. Polytechnic college I believe in practical knowledg
₹700
Savroop
1st class free!

My teaching methods is more practical , we will build basic concepts as per your course requirement and co-relate ...

Classes by webcam Face-to-face classes Approved profile
Want to help students in studies, so they can achieve their dream.
₹500
Mukesh
1st class free!

Focus on concept building, and try to enhance problem solving skills in students, and give practical applications and uses...

Classes by webcam Face-to-face classes Approved profile
Mumbai
To secure a challenging position, where I can effectively contribute my skills and ensure my growth through organization’s growth, possessing competent Technical Skills.
₹400
Komal Ankush
  • (1 review)
1st class free!

2017-2018 - Bachelor in Engineering in Electronics and Telecommunication ,Rajiv Gandhi Institute Of Technology– CGPA...

Face-to-face classes Approved profile
Bhubaneswar
To worksin a firm with a professional work driven environment where I can utilize and apply my knowledge, skills which would enable me as a fresh graduate to grow while fulfill organizational goals.
₹390
PRIYARANJAN
1st class free!

B.TECH(ELECTRICAL AND ELECTRONICS ENGINEERING) SILICON INST.OF...

Classes by webcam
at his home at your home By webcam
1 hour ₹380 Not available Not available
10 hours ₹3,600 Not available Not available
Reserve a class