Homepage
Give Private Classes
₹1,000/hr
1st class FREE!
Tutor profile verified
Response Time 24hr
Classes offered by Mahendra
  • Individual
  • In group
The classes will be held
  • at his home
  • at your home
  • By webcam
Taught subjects
  • Engineering
  • Mechanical engineering
  • Technology
  • Metallurgy
Levels
  • Primary School
  • Middle School
  • Class 10
  • Higher Secondary School
  • Class 12
  • Undergraduate
  • Masters
  • Postgraduate Diploma

Masters in Thermal science having experience in power engineering and aslo tecahing experence in ME students in area of middle gujarat baroda & anand

Methodology

M E In Mechanical Engineering (specialization in Thermal Science) from M. S. University of Baroda with 71% i.e. First Class with Distinction in April-2012.

B E In Mechanical Engineering from M. S. University of Baroda with 64.57% i.e. First Class in final year and in April – 2010.

H S C Under Gujarat State Board in March - 2006 with 73.00% i.e. First Class with distinction.

S S C Under Gujarat State Board in March - 2004 with 71.43% i.e. First Class with Distinction.


ACADEMIC PROJECTS


Project Work on “Correlation and CFD approaches of Thermal design of Double pipe helical coiled heat exchanger” during the final year of M.E.
Project report done on “Thermal Performance on a distributed mass under transient condition” during the final year of Bachelor of engineering.


INDUSTRIAL TRAINING:

I had taken Vocational training in 34.5MW Power Plant at Indian Rayon: Aditya Birla Nuvo Ltd., Veraval during 15/05/08 to 30/05/08.
Industrial visit at Sardar Sarovar Dam 1200MW Hydraulic Power Plant.

Background

I have teaching experience in diploma student and have very good experience in engineering drawing in all branch student.

Also working as mechanical maintenance engineering in combine cycle power plant and looking after Gas turbine,Steam turbine and its related auxiliary.

Project Work on “Correlation and CFD approaches of Thermal design of Double pipe helical coiled heat exchanger” during the final year of M.E.


Rates

Rate for online classes : ₹1,000/hr
Classes offered by Mahendra
Individual
In group
The classes will be held
at his home
at your home
webcam
Taught subjects
  • Engineering
  • Mechanical engineering
  • Technology
  • Metallurgy
Levels
  • Primary School
  • Middle School
  • Class 10
  • Higher Secondary School
  • Class 12
  • Undergraduate
  • Masters
  • Postgraduate Diploma

Mahendra's CV

B.E. Mechanical
M.E. Thermal Science
Energy Manager-B.E.E.

Teaching experience in diploma student.
Also working as mechanical maintenance engineering in combine cycle power plant and looking after Gas turbine,Steam turbine and its related auxiliary.

Job Responsibility:-

Controlling the Gas Turbine Plant and Stem Turbine as per scheduled generation.
Rolling and Shutdown of Combined Cycle Power plant.
Ensuring routine auxiliary change over program.
Maintain auxiliary at rated parameter.
Record, updating data and maintaining history records of major equipment.
Execution energy conversation activity of department.

ACADEMIC PROFILE:

M E In Mechanical Engineering (specialization in Thermal Science) from M. S. University of Baroda with 71% i.e. First Class with Distinction in April-2012.

B E In Mechanical Engineering from M. S. University of Baroda with 64.57% i.e. First Class in final year and in April – 2010.

H S C Under Gujarat State Board in March - 2006 with 73.00% i.e. First Class with distinction.

S S C Under Gujarat State Board in March - 2004 with 71.43% i.e. First Class with Distinction.


ACADEMIC PROJECTS


Project Work on “Correlation and CFD approaches of Thermal design of Double pipe helical coiled heat exchanger” during the final year of M.E.
Project report done on “Thermal Performance on a distributed mass under transient condition” during the final year of Bachelor of engineering.


INDUSTRIAL TRAINING:

I had taken Vocational training in 34.5MW Power Plant at Indian Rayon: Aditya Birla Nuvo Ltd., Veraval during 15/05/08 to 30/05/08.
Industrial visit at Sardar Sarovar Dam 1200MW Hydraulic Power Plant.


SOFTWERE SKILLS:

ANSYS CFX 11.0
Pro. E 5.0 , AUTOCAD-2007
Operating System: MS Office, Windows 98/2000/XP.
Internet Knowledge

Similar teachers

engineering classes closeby? Here's a selection of tutor listings that you can check out.
Superprof can also suggest mechanical engineering classes to help you.
Learning isn't a problem, technology classes for all!
Taking metallurgy classes has never been easier: you're going to learn new skills.

Anand
3rd year student in electronics and communication with 8.9 CPI second ranked
₹700
Amanjeet
1st class FREE!

I focus on textbook content and later for exam point of view can even gives you notes and important question

Face-to-face classes Approved profile
Anand
Manufacturing engineering and ENGINEERING drawings and Little bit of AutoCAD and Creo
₹95
Shah
1st class FREE!

My teaching methods is easy and simple, with daily routine examples

Face-to-face classes Approved profile
Anand
Subject: Engineering Drawings Having industrial knowledge, having knowledge of drafting and design making softwares, can guide how to make engineering drawings and how to make or start with technical
₹300
Er Rishi
1st class FREE!

Topic wise day to day classes make sense to cath and understand the topics and gives time to practice on..

Face-to-face classes Approved profile
Vinzol
The student with No Basic Knowledge Has Great Opportunity to Learn Engineering.
₹60
Sagar
1st class FREE!

When I'm Studying in College, I give the tuition to Friends of mine who do not study in good college.So even do not have any...

Classes by webcam Face-to-face classes Approved profile
Madurai
Aspiring candidate with thorough subject knowledge.  Finished engineering and preparing for competitive exam GATE. I could teach all mechanical engineering subjects.
₹300
Hirushi
1st class FREE!

I am a student oriented teacher. Will do whatever the methods possible to make students understand the subject thoroughly....

Classes by webcam Face-to-face classes Approved profile
Kolhapur
Engineering and Science Classes for all types of students studying engineering and science
₹600
Sagar
1st class FREE!

My teaching method is usually based on the practical examples and application and in my class there is no partiality between...

Classes by webcam Face-to-face classes Approved profile
Hyderabad
SR Academy is giving Home tuitions For Mechanical Engineering Students in Hyderabad
₹300
Naga Kishore
1st class FREE!

Teaching strategy in brief--- First of all, every student is provided with a free demo session to evaluate his/her...

Face-to-face classes Approved profile
Jalna
“Impart quality education to students on technical education & application based module
₹500
Sagat
1st class FREE!

As a teacher I initiate to,  Guided students as technical, Cultural, Sports & Other practices.  Efforts for...

Classes by webcam Face-to-face classes Approved profile
Muzaffarnagar
Mechanical engineering background students in Delhi NCR Can contact for all subjects
₹700
Ashutosh
  • (2 reviews)
1st class FREE!

My teaching method is very simple study less but effective

Classes by webcam Face-to-face classes Approved profile
Bengaluru
Experienced teacher with a master's degree in nanotechnology. Contact for free trail class for physics, chemistry, material science engineering, metallurgy, bioengineering and similar.
₹400
Venkata Surbamanian
1st class FREE!

Simple analogies, take an organic approach to teach. I will focus a lot on the foundation to construct rather than jump to...

Classes by webcam Face-to-face classes Approved profile
Gudalur
Myself KRRISH (COIMBATORE) well-experienced CAD ENGINEER - AutoCAD, Creo, Solid Works, Nx cad, Nx cam, Ansys, GD&t
₹200
Murali
1st class FREE!

I contribute class in 3 major languages (English, Tamil & Telugu) with different teaching methodology such as Theory...

Classes by webcam Face-to-face classes Approved profile
at his home at your home By webcam
1 hour ₹1,000 ₹1,000 ₹1,000
Reserve a class