Homepage
Give Private Classes
Nuzividu 
Nuzividu 
₹380/hr
1st class free!
Pending approval
Response Time 24hr
Classes offered by Nikhil Franklin
  • In group
The classes will be held
  • By webcam
Taught subjects
  • Engineering
  • Mechanical engineering
  • Electrical engineering
  • Agricultural Sciences
  • Electricity
  • Automation
Levels
  • All Levels

To carve a niche in the aeronautical field where I can utilize my skills and talents to the best of my abilities. To gain exposure that will contribute to both professional and personal growth and thu

Methodology

M.Tech Aeronautical Engineering
Hindustan University
6.9 CGPA
PROJECT TITLE: “DESIGN AND FLOW ANALYSIS OF A
CRANKED ARROW DELTA WING USING A BLENDED WING
BODY CONFIGURATION”
Project description: A blended wing body design with a
cranked arrow delta wing configuration was designed and
analysis was carried out using FLUENT software. Analysis
using FLUENT software is carried out with various angles
of attack and the flow is visualized. The main concept of
employing a blended wing body design is that at a certain
angle of attack the wing stalls but the fuselage
contributes a considerable amount of lift. Analysis at
mach 0.1 and mach 0.3 were carried out and the pressure
distribution were plotted
08/2008 – 04/2012
B.E Aeronautical Engineering
Dhanalakshmi Srinivasan College of Engineering and Technology(ANNA UNIVERSITY, Chennai)
7.57 CGPA
PROJECT TITLE: “FABRICATION AND ANALYSIS OF A TILT
WING UAV.” Project description: An UAV model is designed using
CATIA software and it is fabricated with a tilt wing
configuration. A detailed analysis is carried out to
enhance the advantage of a tilt wing, which helps in
reducing the run way length for short take off. The wing is
tilted to about 18 degrees, which helps for a short take
off.
06/2007 – 05/2008
CLASS XII (ISC Board)
Seventh Day Adventist Higher Secondary School,Kuttapuzha Kerala
63%
English, Mathematics , Physics, Chemistry, Biology, Environmental Education
06/2005 – 05/2006
CLASS X (ICSE Board)
Seventh-Day Adventist Higher Secondary School, Nuzvid, AndhraPradesh

Background

M.Tech Aeronautical Engineering
Hindustan University
6.9 CGPA
PROJECT TITLE: “DESIGN AND FLOW ANALYSIS OF A
CRANKED ARROW DELTA WING USING A BLENDED WING
BODY CONFIGURATION”
Project description: A blended wing body design with a
cranked arrow delta wing configuration was designed and
analysis was carried out using FLUENT software. Analysis
using FLUENT software is carried out with various angles
of attack and the flow is visualized. The main concept of
employing a blended wing body design is that at a certain
angle of attack the wing stalls but the fuselage
contributes a considerable amount of lift. Analysis at
mach 0.1 and mach 0.3 were carried out and the pressure
distribution were plotted
08/2008 – 04/2012
B.E Aeronautical Engineering
Dhanalakshmi Srinivasan College of Engineering and Technology(ANNA UNIVERSITY, Chennai)
7.57 CGPA
PROJECT TITLE: “FABRICATION AND ANALYSIS OF A TILT
WING UAV.” Project description: An UAV model is designed using
CATIA software and it is fabricated with a tilt wing
configuration. A detailed analysis is carried out to
enhance the advantage of a tilt wing, which helps in
reducing the run way length for short take off. The wing is
tilted to about 18 degrees, which helps for a short take
off.
06/2007 – 05/2008
CLASS XII (ISC Board)
Seventh Day Adventist Higher Secondary School,Kuttapuzha Kerala
63%
English, Mathematics , Physics, Chemistry, Biology, Environmental Education
06/2005 – 05/2006
CLASS X (ICSE Board)
Seventh-Day Adventist Higher Secondary School, Nuzvid, AndhraPradesh

Rates

Rate for online classes : ₹380/hr
Rate for 10 hours of classes : ₹3,600
Classes offered by Nikhil Franklin
In group
The classes will be held
webcam
Taught subjects
  • Engineering
  • Mechanical engineering
  • Electrical engineering
  • Agricultural Sciences
  • Electricity
  • Automation
Levels
  • All Levels

Nikhil Franklin 's CV

Page 1 of 3
Nikhil Franklin Plakuzhiyil
Assistant Professor
(concealed information)
(concealed information)
Door No.5-38/1A, Dum Dum Gardens,Nuzvid P.O., Krishna Dt.,Andhra Pradesh., vijayawada, India
To carve a niche in the aeronautical field where I can utilize my skills and talents to the best of my abilities. To gain exposure that will
contribute to both professional and personal growth and thus become an asset to the company. EDUCATION
10/2012 – 05/2014
M.Tech Aeronautical Engineering
Hindustan University
6.9 CGPA
PROJECT TITLE: “DESIGN AND FLOW ANALYSIS OF A
CRANKED ARROW DELTA WING USING A BLENDED WING
BODY CONFIGURATION”
Project description: A blended wing body design with a
cranked arrow delta wing configuration was designed and
analysis was carried out using FLUENT software. Analysis
using FLUENT software is carried out with various angles
of attack and the flow is visualized. The main concept of
employing a blended wing body design is that at a certain
angle of attack the wing stalls but the fuselage
contributes a considerable amount of lift. Analysis at
mach 0.1 and mach 0.3 were carried out and the pressure
distribution were plotted
08/2008 – 04/2012
B.E Aeronautical Engineering
Dhanalakshmi Srinivasan College of Engineering and Technology(ANNA UNIVERSITY, Chennai)
7.57 CGPA
PROJECT TITLE: “FABRICATION AND ANALYSIS OF A TILT
WING UAV.” Project description: An UAV model is designed using
CATIA software and it is fabricated with a tilt wing
configuration. A detailed analysis is carried out to
enhance the advantage of a tilt wing, which helps in
reducing the run way length for short take off. The wing is
tilted to about 18 degrees, which helps for a short take
off.
06/2007 – 05/2008
CLASS XII (ISC Board)
Seventh Day Adventist Higher Secondary School,Kuttapuzha Kerala
63%
English, Mathematics , Physics, Chemistry, Biology, Environmental Education
06/2005 – 05/2006
CLASS X (ICSE Board)
Seventh-Day Adventist Higher Secondary School, Nuzvid, AndhraPradesh
75%
English, Mathematics , Social Studies, Physics, Chemistry, Biology, Environmental Education
Masters THESIS
UG Thesis
Courses
Courses
Page 2 of 3
5 YEARS
06/2016 – Present
Assistant Professor
Annasaheb Dange College of Engineering and Technology
Maharashtra, India Assistant Professor Working as Assistant Professor at Annasaheb Dange College of Engineering and Technology, Maharashtra from June 2016 till
date. Subjects taught during the tenure at Annasaheb Dange College of Engineering and Technology, Maharashtra - Aerospace
Propulsion, Air Transportation Systems and Airport Planning and Operations.
08/2014 – 05/2016
Assistant Professor
Institute of Aeronautical Engineering
Hydearabad, India Worked as an Assistant Professor at Institute of Aeronautical Engineering, Hyderabad from August 2014 till May 2016. Subjects taught during the tenure at Institute of Aeronautical Engineering, Hyderabad- Aerospace Propulsion, Aerodynamics, and Engineering Drawing.
TEACHING EXPERIENCE
01/2016 – Present
B.Tech Aeronautical Engineering
Annasaheb Dange College of Engineering and Technology
Maharashtra, India
Class Advisor, Subjects taught include Aerospace Propulsion, Aviation, Airport Planning and Operations and Air Transportation
Systems
08/2014 – 05/2016
B.Tech Aeronautical Engineering
Institute of Aeronautical Engineering
Hyderabad,India
Subjects taught during the tenure include Aerospace Propulsion and Engineering Drawing.
PERSONAL PROJECTS
• Guided various projects at undergraduate level that include fabrication of a VTOL Aerial vehicle (10/2015 – 03/2016)
PUBLICATIONS
International Conference, IISC, Bangalore Fatigue damaged residual flexural strength of plain
weave Bi directional Carbon /Epoxy composite
Author(s)
Dr. P.K. Dash, M.G. Vasu , Nikhil Franklin P. Date of Publication
May 28-30, 2015
LANGUAGES
Egnlish Telugu
Malayalam Tamil
Hindi Kannada
Marathi
Assistant Professor/ Placement Coordinator for recruitment of students
Tasks/Achievements
Tasks/Achievements
Page 3 of 3
REFERENCES
Dr. A. Barai
“Senior Professor” Contact: (concealed information)
Dr. N. Kishorenath
“Scientist "G ", DRDL, Hyderabad” Contact: (concealed information)
T.M. Naidu
“Ex-Project Director(Airframe), LCA TEJAS, Aeronautical Development
Agency, Bangalore” Contact: (concealed information)

Similar teachers

engineering classes closeby? Here's a selection of tutor listings that you can check out.
Superprof can also suggest mechanical engineering classes to help you.
Learning isn't a problem, electrical engineering classes for all!
Taking agricultural sciences classes has never been easier: you're going to learn new skills.

Krishna (District)
Students will learn machines and power system in engineering indiploma level i
₹400
Siva raghavendra Rao
1st class free!

My teaching level is basic of electrical engineering subjects

Face-to-face classes
Bengaluru
I look forward to associate myself with an organization where there is an opportunity to Share, contribute and upgrade my knowledge for development of self and Organization Served.
₹420
GOVINDA RAJULU.
1st class free!

M.Tech IT (Networking) Vellore Institute of Technology Vellore VIT Vellore 7.8 C.G.P.A June...

Classes by webcam Approved profile
Kondumal
To work efficiently and delicately in a good working Environment & all fulfilling responsibility as a good employee.”
₹350
LEKHADEVI KRUSHNARAO
1st class free!

01 B.E ELCTRICAL SHRI SAI COLLEGE OF ENGG. & TECHNOLOGY,BHADRAWATI GONDWANA 2016-2017 72.96% 02 HSC VIDYA NIKETAN Jr....

Classes by webcam Approved profile
Nashik
I would like to be a part of a dynamic organization, working on challenging assignments, thus contributing to the organization's productivity & gaining substantial experience with job satisfaction and
₹400
Akshay
1st class free!

• M. E. in Mechanial(Design) Engineering May 2013 SRES’s C.O.E. Kopargaon 7.23 CGPA • B. E. in...

Classes by webcam Approved profile
Hyderabad
Holds Masters Degree in Computer Science & Engineering in Nov’2012 and Bachelors Degree in Computer Science & Engineering in May 1997.
₹400
Shaik Abdul ,
1st class free!

 M.Tech Computer Science & Engineering First Class with Distinction(79.44%) Nov’ 2012 RITS College, ,Chevella,...

Classes by webcam Approved profile
Yavatmal
Participated as Judge for Technical session in National Level Technical Paper Presentation Competition “PRANETA” 2012 during 18-19 Feb 2012 organized by JDIET, Yavatmal.
₹410
Mr. Komal G.
1st class free!

Qualification Board/University Percentage/CGPA Year of passing M.E (Digital...

Classes by webcam
Bengaluru
Passionate towards Teaching! Completed ME from Anna University. All ECE subjects like DSP, signals and systems, Digital Electronics, etc., Mathematics (All levels), GATE and NET coaching!
₹200
Muthusivagami
  • (24 reviews)
1st class free!

My teaching methods are chalk and talk or by presentation using PPT (whichever is applicable) , make the students to solve...

Classes by webcam Face-to-face classes Approved profile
Bagalkot
Post graduate in Highway Technology takes classes for engineering students in highway engineering ,traffic engineering ,pavement design.
₹300
Keerti
  • (7 reviews)
1st class free!

My teaching methods are simple and easy to understand. Ill explain in detail all the topics with practical and simple...

Classes by webcam Face-to-face classes Approved profile
at his home at your home By webcam
1 hour Not available Not available ₹380
10 hours Not available Not available ₹3,800
Reserve a class